D Plumbing The Intellistart Fluidics System - Waters Xevo TQD Overview And Maintenance Manual

D
Plumbing the IntelliStart Fluidics
System
This appendix provides reference information for replacing the tubing in
the IntelliStart™ Fluidics system.
Contents:
Topic
Preventing contamination ............................................................... 248
The selector valve............................................................................. 248
Plumbing schematic......................................................................... 249
Tubing and connection specifications ............................................. 250
To avoid electric shock, do not use stainless steel
Warning:
tubing or stainless steel "finger tight" screws to connect the
selector valve to the source probes; use the PEEK tubing and
natural (beige) colored PEEK "finger tight" screws specified
on page 250.
To avoid personal contamination, always wear
Warning:
chemical-resistant, powder-free gloves while working on the
system.
March 14, 2014, 715004387 Rev. B
Page
247