Table of Contents
Advertisement
Machine Setup menu table
Function name
AUTO Power-off (
P.3-18)
Feeding device missing(
P.3-18)
Take-up Unit (
P.3-19)
Media Remain (
P.3-19)
Time Set (
P.3-19)
Unit/ Temp. (
P.3-19)
Unit/ Length (
P.3-19)
Key Buzzer (
P.3-20)
Select head (
P.3-20)
Media Detect/ Width (
P.3-20)
Drying Feed (
P.3-20)
CONFIRM. FEED (
P.3-21)
Space Btwn PP. (
P.3-21)
Space Feed Mode (
P.3-21)
Set the network.
Check IP
Address
Check
MAC
Address
DHCP
Network
AutoIP
(
P.3-22)
IP
Address
Def.
Gateway *1
DNS
Address
Network &
SubNet
Mail
Mask *1
Mail
Delivery
Select
Event
Event Mail
(
P.3-22)
Mail
Address
Message
Subject
Set value
NONE/ 10 ~ 600min
ON/ OFF
ON/ OFF
ON/ OFF
Hours/Minutes/Seconds
°C (Centigrade)/°F
(Fahrenheit)
mm / inch
OFF / ON
All/ Head Line 1/
Head Line 2/ Head Line 3/
Head Line 1&2/ Head Line 2&3
Auto/ Manual
OFF/100 to 1000mm
ON/ OFF
None/10 to 500mm
INTERMITTENT/
CONTINUOUS
The IP address currently used by this machine is displayed.
The MAC address currently used by this machine is displayed.
OFF / ON
OFF / ON
Set the IP address used by this machine.
*1
Set the default gateway used by this machine.
Set the DNS server address used by this machine.
*1
Set the digit number of the subnet mask used by this machine.
ON / OFF
Print Start
ON / OFF
Print End
ON / OFF
Error Event
ON / OFF
Warning Event ON / OFF
Other Event
ON / OFF
Set the e-mail address to
which you send the event mail.
Set the characters to write in
the subject of the event mail.
Default
Description
When no operation has been performed for the set
30min
time, the power supply is automatically turned
"OFF".
You can set the operation method when the ON/
ON
OFF button for the take-up device is pressed.
You can set the operation method when the ON/
ON
OFF button for the take-up device is pressed.
OFF
You can control the remaining amount of media.
Time difference is corrected.
°C
A unit for displaying temperature is set.
mm
A unit for displaying length and area is set.
ON
A buzzer sound when keys are pressed is set.
If troubles such as the nozzle clogging is not solved,
All
you can print with another head which has no error.
When you want to enter the optional media width
Auto
when setting media and there is a problem with the
media width sensor, use "MANUAL" to set the width.
To dry evenly up to the back edge of the printing
OFF
data, set the length to be fed after printing has been
completed.
Set whether media feeding is performed for
OFF
checking the result of the test printing etc. or not.
Sets the amount of blank space between printed
None
lines.
INTERMIT
Change the feed mode of the margin included in the
TENT
image data.
When it is ON, the IP address given by the DHCP
server is used.
When it is ON, the IP address is determined by the
AutoIP protocol. However, DHCP is ON, DHCP has
priority.
Set whether you send/ do not send the e-mail when
OFF
the set event occurs.
Set whether you send/ do not send the e-mail at the
OFF
start of printing.
Set whether you send/ do not send the e-mail at the
OFF
end of printing.
Set whether you send/ do not send the e-mail when
OFF
an error occurs.
Set whether you send/ do not send the e-mail when
OFF
a warning occurs.
Set whether you send/ do not send the e-mail when
OFF
an event other than the above occurs.
Alphanumeric characters and symbols (within 96 characters)
Alphanumeric characters and symbols (within 8 characters)
Chapter 3 Setup
3
2
2
3-17
Advertisement
Table of Contents
