Charging Ink - MIMAKI Tx500P-3200DS Operation Manual

Chapter 4 Maintenance

Charging ink

If auto charging is not possible, or if you want to check the
content of the IC chip before charging ink, perform the
following operation.
1
Press the
2
Press
and press the
3
Press
press the
4
Press
charged.
5
Press
• If the selected ink tank is near its expiration date, a
confirmation screen will appear. If OK, press [].
Expiration
CHARGEANYWAY?
Expiration
NO <
Expiration:1MONTH
CHARGEANYWAY?
Expiration:1MONTH
NO <
• The selected tank cannot be charged an either of
the following situations. (P.3-28)
(1) The volume of remaining ink managed by
the printer is 100%.
(2) The ink expiration date has passed by 2
months or more.
4-20
(MENU) in LOCAL.
to select "Maintenance"
key.
to select "Charge Ink", and
key.
to select the ink tank to be
key.
Displayed alternately
> YES
Displayed alternately
> YES
6
Insert the IC chip included with the 2 liter
ink bottle.
• When an IC chip is inserted into the printer and
the information on the IC chip is loaded, the
display will change as shown on the right.
• Insert the IC chip with the metal part facing rear
side and down. If you insert the wrong side by
accident, it causes faulty or damage of the IC
chip.
• Do not touch the metal part of the IC chip. It may
break the IC chip by static, or may cause read
error by stain or flaw.
Metal part facing
rear side
Down
CHARGEINK:TANK1-M
PLEASEINSERTINKIC
• If the inserted IC chip is near its expiration date, a
confirmation screen will appear. If OK, press [].
Expiration
CHARGEANYWAY?
Expiration
NO <
Expiration:1MONTH
CHARGEANYWAY?
Expiration:1MONTH
NO <
• If there is a problem with the inserted IC chip and
you can not charge , the display shows the reason.
• If there are multiple problems, use [][] to scroll
through them.
IC chip inserting
port
Displayed alternately
> YES
Displayed alternately
> YES