Table of Contents
Advertisement
7
When the "CHARGE START" confirmation
screen appears, press
• Charging starts.
• The ink information on the IC chip appears in the
display.
• While the ink is charging, the screen is displayed
*Ink Charge*.
Do not remove the IC chip or turn the printer off.
8
When charging is complete, the buzzer will
sound momentarily and then the screen
will display the message "Complete Ink
Charge".
• To check the volume and expiration date of the ink
that has been charged, press the [ENTER] key in
Local. (P.3-28)
Replacing the Waste
key.
Ink Tank
If a Waste Ink Tank Confirmation
Message Appears
Ink used in head cleaning, etc. is stored in the waste ink
tank on the lower right side of the machine. The sensor
monitors the discharged amount of ink in this machine.
When that reaches a specified amount, the machine
displays a confirmation message. (When this message
is displayed, consider the replacement of the waste
ink tank.)
Confirmation Message in LOCAL
1
The confirmation message is displayed.
• The following message will be displayed.
2
Check the state of the waste ink tank
Replace the waste ink tank on the right
side of the machine
In the waste ink tank of the right side of the machine, the
ink and cleaning solution discharged around the head at
the printing or head cleaning will be accumulated.
When replacing the waste ink tank, please perform the
following tasks.
1
Open the waste ink tank cover.
• Remove the screw attaching to the waste ink tank
Chapter 4 Maintenance
"Waste ink near full"
"Waste ink full"
"Waste ink tank none"
cover and open the cover to the front.
4
2
4-21
Advertisement
Table of Contents
