Table of Contents
Advertisement
Warning / Error Messages
If some trouble occurs, the buzzer sounds and the display shows a corresponding error message.
Take an appropriate remedy for the displayed error.
Warning messages
Errors when performing operations
Message
ERROR 901
INVALID OPERATION
ERROR 902
DATA REMAIN
ERROR 90d
NO HEAD SELECT
ERROR 90f
PRINT AREA SHORT
ERROR 912
INVALID INK CHARGE
Errors when the printer stops due to an emergency
Message
Close the cover.
MEDIA JAM
Cause
Operation error
There remains received data that has not
yet been printed.
Executed the processing without selecting
a head.
The media is not wide or long enough for
printing.
Cannot ink charge by the following factors.
• Detected an abnormality of the informa-
tion of the IC chip.
• The expiration date for the ink has
passed.
• The charged ink level is nearly full, so ink
cannot be charged.
• The expiration date for the ink tank has
passed.
Cause
The cover is open.
A media jam is occurred.
Chapter 5 Troubleshooting
Measures
• Return to the LOCAL screen, check the
error status, and take appropriate actions.
• Execute the data clear function.
(
P.2-37)
• Select the head. (
P.3-20)
• Replace the media with one having
enough width or length.
• If the media width is decreased because
the origin is moved, shift the origin to the
right to increase the effective media
width.
• Please run the ink charge (
again. If you still cannot charge, please
check the cause that cannot be charged
with P.3-28"Displaying the Information of
this machine"
Measures
• Close the cover. (
P.ix)
• When [ENTER] is displayed on the
screen, press the
ery operations begin.
• When the machine cannot recover, or the
cover is already closed and the message
is still displayed, turn off the main power
to the machine and turn it on after a
while.
If
the
same
error message
appears, contact our service desk or your
local distributor to call for service.
• Remove the clogged media. (
• When [ENTER] is displayed on the
screen, press the
ery operations begin.
• When the machine cannot recover, or the
cover is already closed and the message
is still displayed, turn off the main power
to the machine and turn it on after a
while.
If
the
same
error message
appears, contact our service desk or your
local distributor to call for service.
1
2
P.1-10)
2
key. Recov-
2
P.5-3)
5
key. Recov-
5-5
Advertisement
Table of Contents
