Table of Contents
Advertisement
Chapter 4 Maintenance
Replacing consum-
ables
Replacing the wiper
The wiper is consumable. When the warning message
"Replace a WIPER" is displayed, it is necessary to
replace the wiper, immediately replace the wiper with a
new one.
Also, wipe ink sticking to the lower surface of the wiper
cleaner off.
• A cleaning wiper (SPA-0193) is an option. Buy one
through the dealer in your region or at our service
office.
1
Press the
(MAINT) in LOCAL.
• The Maintenance menu appears.
2
Press
and press the
3
Press
• The carriage moves onto the platen.
• The number of times when the wiper was used is
reset.
• Until the replacement work is completed,
[COMPLETED" is displayed on the screen. After
the work up to the Step 3 is completed and you
close the lower part of the right side front cover,
press the [ENTER] key.
4
Open the right maintenance cover then
remove the wiper.
• Pull out the wiper by holding the protrusions at its
both ends.
5
Insert a new wiper.
• Insert a new wiper by holding its both ends.
• There is no direction to the wipers. They can be
inserted with either side facing forward.
4-24
key and press
to select "Replace Wiper",
key.
key.
Projection
6
Close the lower part of the right side front
cover, and press the
• After its initial operation, the machine returns to
Local.
Replacing the HF filter
Replace it once a month.
1
Press the
(MAINT) in LOCAL.
• The Maintenance menu appears.
2
Press
, select [Carriage Out], and
press the
• The carriage moves onto the platen.
3
Remove the HF filter cover at the left and
right of the carriage.
(1) Remove the HF filter cover of right and left of
the carriage.
(2) Pinch the claw attached to the upper part of
the HF filter cover and pull it to the front.
HF filter cover
4
Remove the used HF filter.
key.
key and press
key twice.
Carriage
Claw
HF filter
Advertisement
Table of Contents
