Machine Setup Menu Table - MIMAKI Tx300P-1800 Operation Manual

MACHINE SETUP MENU table

Function name
AUTO Power-off ( P.3-14)
FEEDING UNIT
FEEDING
TENSION BAR
FEEDING/
TAKE-UP UNIT
TAKE-UP UNIT
TAKE-UP
( P.3-14)
TENSION BAR
FEEDING/
TAKE-UP SW
ON
Top blower
( P.3-15)
OFF
MEDIA REMAIN ( P.3-15)
HEAD HEIGHT ( P.2-8)
PG DROP ADJUST ( P.3-16)
DETECTION TYPE AUTO/MANUAL
INPUT
MEDIA DETECT
THICKNESS
( P.3-17)
DIA.DETECT
DRYING FEED
DRYING FEED
( P.3-17)
LANGUAGE ( P.3-17)
TIME ( P.3-17)
UNIT/ TEMP. ( P.3-17)
UNIT/ LENGTH ( P.3-17)
KEY BUZZER ( P.3-17)
VIEW FEED ( P.3-18)
Space Btwn PP. ( P.3-18)
SPACE FEED MODE ( P.3-18)
Set the network.
Check IP Addr.
Check MAC Addr.
DHCP
NETWORK
( P.3-19) AutoIP
*1
IP Address
Default Gateway
DNS Address
SubNet Mask
Set value
NONE/
10 ~ 600 min
ON/ OFF
ON/ OFF
ON/ OFF
ON/ OFF
Continuance/ Temporary
AUTO/ STRONG/ WEAK
ON/ OFF
2.0 to 7.0 mm
ON/ OFF
AUTO/MANUAL
OFF/ 100 to 1,000mm
+4 h ~ -20 h
°C (Centigrade)/°F (Fahrenheit) °C
mm / inch
OFF / ON
ON / OFF
None/ 10 to 500 mm
INTERMITTENT /
CONTINUOUS
The IP address currently used by this machine is displayed.
The IP address currently used by this machine is displayed.
ON / OFF
ON / OFF
Set the IP address used by this machine.
*1
Set the default gateway used by this machine.
*1
Set the DNS server address used by this machine.
*1
Set the digit number of the subnet mask used by this machine.
Chapter 3 Machine setting
Default Meaning
When no operation has been performed for the
30 min set time, the power supply is automatically
turned "OFF".
ON Set whether to use or not to use feeding unit.
Set whether to use or not to use feeding tension
OFF
bar.
ON Set whether to use or not to use take-up unit.
Set whether to use or not to use take-up tension
OFF
bar.
Continua Set how to operate when the ON/OFF switch for
nce feeding/take-up device is pressed.
AUTO
Set the operation of the top blower in print.
OFF You can control the remaining amount of media.
Set the head height.
Adjust the outward and return ink drop positions
during bidirectional printing.
AUTO Set the media detection method.
Set whether to enter the thickness of the media
ON
to be used during media detection.
Sets the detection method of the media outer
AUTO
diameter of the take-up unit and feeding unit.
Set the length of the media to feed after printing
OFF
is complete.
English Displayed language is changed.
Japan time Time difference is corrected.
A unit for displaying temperature is set.
mm A unit for displaying length and area is set.
ON A buzzer sound when keys are pressed is set.
Set whether media feeding is performed for
ON
checking the result of the test printing etc. or not.
Sets the amount of blank space between printed
None
lines.
INTERMI Change the feed mode of the margin included in
TTENT the image data.
When it is ON, the IP address given by the
DHCP server is used.
When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
1
2
3
4
5
6
3-13