Machine Setup Menu Table - MIMAKI JV300-130 A Operation Manual

MACHINE SETUP MENU table

Function name
AUTO Power-off ( P.3-12)
SETUP
AUTO Power-on
(Plus series) Time
( P.3-12)
Day
Drying/Exhaust FAN
MEDIA REMAIN ( P.3-13)
LANGUAGE ( P.3-13)
TIME ( P.3-13)
UNIT/ TEMP. ( P.3-13)
UNIT/ LENGTH ( P.3-13)
KEY BUZZER ( P.3-14)
CONFIRM. FEED ( P.3-14)
SPACE FEED MODE ( P.3-14)
Set the network.
Check IP Addr.
Check MAC Addr.
DHCP
NETWORK
( P.3-14) AutoIP
*1
IP Address
Default Gateway
DNS Address
SubNet Mask
Mail Delivery
( P.3-15)
Select Event
( P.3-16)
Mail Address
( P.3-16)
EVENT MAIL
Message Subject
( P.3-16)
Server Setup
( P.3-17)
Server Setup
( P.3-17)
Set value
NONE/
10 ~ 600min
ON/OFF
0:00 ~ 23:59 [1 minute unit]
Each day of the week. ON/OFF
Set when use the optional Drying / exhaust fan. For more information, please refer to the
instruction manual that came with the Drying/exhaust fan.
ON/ OFF
+4h ~ -20h
°C (Centigrade)/°F (Fahrenheit)
mm / inch
OFF / ON
ON / OFF
INTERMITTENT /
CONTINUOUS
The IP address currently used by this machine is displayed.
The IP address currently used by this machine is displayed.
ON / OFF
ON / OFF
Set the IP address used by this machine.
*1
Set the default gateway used by this machine.
*1
Set the DNS server address used by this machine.
*1
Set the digit number of the subnet mask used by this machine.
ON / OFF
Print Start
ON / OFF
Event
Print End Event ON / OFF
Error Event ON / OFF
Warning Event ON / OFF
Other Event ON / OFF
Set the e-mail address to which
you send the event mail.
Set the characters to write in the
subject of the event mail.
SMTP Address
SMTP Port No.
SENDER ADDRESS
POP before
SMTP
SMTP
Authentication
Authentication
OFF
*2
User Name
Pass Word *2
Chapter 3 Machine setting
Default Meaning
When no operation has been performed for the
30min set time, the power supply is automatically
turned "OFF".
OFF
The machine starts automatically at the set day
0:00
of the week and time.
ON (All)
OFF You can control the remaining amount of media.
English Displayed language is changed.
Japan time Time difference is corrected.
°C A unit for displaying temperature is set.
mm A unit for displaying length and area is set.
ON A buzzer sound when keys are pressed is set.
Set whether media feeding is performed for
ON
checking the result of the test printing etc. or not.
INTERMI Change the feed mode of the margin included in
TTENT the image data.
When it is ON, the IP address given by the
-
DHCP server is used.
When it is ON, the IP address is determined by
- the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
Set whether you send/ do not send the e-mail
OFF
when the set event occurs.
Set whether you send/ do not send the e-mail at
OFF
the start of printing.
Set whether you send/ do not send the e-mail at
OFF
the end of printing.
Set whether you send/ do not send the e-mail
OFF
when a error occurs.
Set whether you send/ do not send the e-mail
OFF
when a warning occurs.
Set whether you send/ do not send the e-mail
OFF
when an event other than the above occurs.
Alphanumeric characters and symbols (within 96
-
characters)
Alphanumeric characters and symbols (within 8
-
characters)
- Set the SMTP server.
- Set the SMTP port number.
Set the e-mail address to be used as the sender
-
mail address.
-
Set the SMTP server authentication method
-
(SMTP authentication).
-
- Set the user name used for the authentication.
- Set the password used for the authentication.
1
2
3
4
5
6
3-11