Table of Contents
Advertisement
Chapter 3 Setup
Displaying the Information
1
Press the
2
Press
press the
• Information menu appears.
3
Press
• Refer to the "Information menu", and select the
information to be displayed.
4
Press
• If you selected [List] in step 2, the machine's
settings will be printed.
5
Press
the setting.
Resetting wiper use count
1
"Usage" of Information menu is displayed.
(1) Press the [FUNC1] (MENU) in Local
(2) Press [][] to select "Information", and
press the [ENTER] key twice.
2
Press
press the
• A confirmation screen appears asking if you want
to clear the use count of the wiper.
3
Press the
• The use count of the wiper is cleared.
3-28
(MENU) in Local.
to select "Information" and
key.
to select a item.
key.
key several times to end
to select "Wiping" , and
() key.
key to clear the counter.
Displaying the Information of this
machine
1
Press the
key in Local.
2
The information is displayed sequentially
with the
key .
• The information shown on the below appear.
Ink information
Error/ Warning
(Only at the time of
occurrence)
Machine information
(Media width/ Serial No. /
Version)
Nozzle check result
(The number of missing
nozzles detected by nozzle
check)
3
Press the
key to return to Local.
Sb310
1.
90% No Error
M
2.
90% No Error
M
3.
80% No Error
B
4.
80% No Error
B
Warning
Warning
Media Undetected
!NCU CONNECT
Information
Media width
3200mm
Head gap
0.5mm
Serial No.
'00000000
TS500P-3200
V1.00
LAN status
No Connect
Nozzle Check
1/3
Line1 M
０
M
Line1 B
０
B
Line1 Y
０
Y
Line1 K
０
K
０
Line2 M
M
<<
>>
Advertisement
Table of Contents
