Machine Setup Menu Table - MIMAKI TS500P-3200 Operation Manual

Machine Setup menu table

Function name
AUTO Power-off ( P.3-18)
Feeding Unit ( P.3-18)
Take-up Unit ( P.3-19)
Media Remain ( P.3-19)
Time Set ( P.3-19)
Unit/ Temp. ( P.3-19)
Unit/ Length ( P.3-19)
Key Buzzer ( P.3-20)
Head Select ( P.3-25)
Media Detect/ Thick ( P.3-20)
CONFIRM. FEED ( P.3-21)
Drying Feed ( P.3-27)
BACKWORD FEED
CONFIRM. FEED ( P.3-27)
Backward Feed
Space Btwn PP. ( P.3-25)
Space Feed Mode ( P.3-25)
Set the network.
Check IP
Address
Check MAC
Address
DHCP
Network
( P.3-27)
AutoIP
IP Address
Def.Gateway
DNS
Address
SubNet Mask
Network &
Mail
Mail
Deliverry
Select
Event
Event Mail
( P.3-27)
Mail
Address
Message
Subject
Set value
NONE/
10 ~ 600min
ON/ OFF
ON/ OFF
ON/ OFF
+4h ~ -20h
°C (Centigrade)/°F (Fahrenheit) °C
mm / inch
OFF / ON
All/ Head Line 1/
Head Line 2/ Head Line 3/ Head
Line 1&2/ Head Line 2&3
Auto/ Manual
ON / OFF
OFF/100 to 1000mm
ON/OFF
ON/OFF
ON/OFF
None/10 to 500mm
INTERMITTENT/
CONTINUOUS
The IP address currently used by this machine is displayed.
The IP address currently used by this machine is displayed.
ON / OFF
ON / OFF
*1
Set the IP address used by this machine.
*1
Set the default gateway used by this machine.
Set the DNS server address used by this machine.
*1
*1
Set the digit number of the subnet mask used by this machine.
ON / OFF
Print Start ON / OFF
Print End ON / OFF
Error Event ON / OFF
Warning Event ON / OFF
Other Event ON / OFF
Set the e-mail address to which
you send the event mail.
Set the characters to write in the
subject of the event mail.
Default Meaning
When no operation has been performed for the
30min set time, the power supply is automatically turned
"OFF".
You can set the operation method when the ON/
ON
OFF button on the take-up unit is pressed.
You can set the operation method when the ON/
ON
OFF button for the take-up device is pressed.
OFF You can control the remaining amount of media.
Time difference is corrected.
A unit for displaying temperature is set.
mm A unit for displaying length and area is set.
ON A buzzer sound when keys are pressed is set.
If a trouble such as nozzle clogging cannot be
All solved, you can print only with the head without
the trouble.
Auto Set the media detection method.
Set whether media feeding is performed for
ON
checking the result of the test printing etc. or not.
OFF To dry evenly up to the back edge of the printing
data, set the length to be fed after printing has
ON
been completed.
ON
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
ON
Sets the amount of blank space between printed
None
lines.
INTERMIT Change the feed mode of the margin included in
TENT the image data.
When it is ON, the IP address given by the DHCP
server is used.
When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
Set whether you send/ do not send the e-mail
OFF
when the set event occurs.
Set whether you send/ do not send the e-mail at
OFF
the start of printing.
Set whether you send/ do not send the e-mail at
OFF
the end of printing.
Set whether you send/ do not send the e-mail
OFF
when an error occurs.
Set whether you send/ do not send the e-mail
OFF
when a warning occurs.
Set whether you send/ do not send the e-mail
OFF
when an event other than the above occurs.
Alphanumeric characters and symbols (within 96 characters)
Alphanumeric characters and symbols (within 8 characters)
3
2
2
3-17