MIMAKI Tx500P-3200DS Operation Manual page 132

Chapter 5 Troubleshooting
Message
Release the emergency switch.
Close the cover.
Release the emergency switch.
(Clamp lever OFF)
Errors when ink charging is performed
Message
INK IC Expiration
CHARGE ANYWAY?
NO <
IC Expiration:1MONTH
CHARGE ANYWAY?
NO <
IC Expiration:2MONTH
INVALID INK CHARGE
WRONG INK IC
INVALID INK CHARGE
INK TYPE
INVALID INK CHARGE
5-6
Cause
The emergency switch has been pressed.
The cover is open.
Or, the emergency switch has been
pressed.
Clamp lever is raised.
Cause
The expiration date for the inserted IC chip
has passed.
> YES
The expiration date of the inserted IC chip
has passed (one month has passed after
> YES the specified expiration date).
The expiration date of the inserted IC chip
has passed (two months have passed after
the specified expiration date).
The IC chip cannot be read normally.
An IC chip that has already been charged
was inserted.
Measures
• Release the emergency switch.
( P.1-14)
• When [ENTER] is displayed on the
screen, press the
ery operations begin.
• When the machine cannot recover, or the
cover is already closed and the message
is still displayed, turn off the main power
to the machine and turn it on after a
while. If the same error message
appears, contact our service desk or your
local distributor to call for service.
• Close the cover. ( P.ix)
• Release the emergency switch.
( P.1-14)
• When [ENTER] is displayed on the
screen, press the
ery operations begin.
• When the machine cannot recover, or the
cover is already closed and the message
is still displayed, turn off the main power
to the machine and turn it on after a
while. If the same error message
appears, contact our service desk or your
local distributor to call for service.
• Push down the clamp lever.
( P.1-3)
• When [ENTER] is displayed on the
screen, press the
ery operations begin.
• When the machine cannot recover, or the
cover is already closed and the message
is still displayed, turn off the main power
to the machine and turn it on after a
while. If the same error message
appears, contact our service desk or your
local distributor to call for service.
Measures
• Change the ink bottle with a new one.
• Select [YES] to continue to use the ink.
• Charging is impossible. Insert the IC chip
of the ink bottle which has not passed its
expiration date.
• If the error occurs on the ink which is still
in its expiration date, check the time of
this machine.
• Remove the IC chip generating the warn-
ing once and install it again.
• If the same warning message still
appears, contact your local distributor to
call for service.
• Install the new IC chip.
key. Recov-
key. Recov-
key. Recov-