MIMAKI Tx500P-3200DS Operation Manual page 137

Ink Error
Ink error is displayed also in the local guidance. (
Message
Ink tank - Unavailable
Ink End
Ink Near END
Expiration
Expiration: 1 MONTH
Expiration: 2 MONTH
Tank End
Tank Near End
Charge Near End
Charge End
AD VAL Error
P.3-28)
Cause
The ink tank is not set on the external ink
supply unit.
No ink that can be used.
The ink in the ink tank is low.
The expiration date for the ink has passed.
The expiration date for the ink has passed.
(1 month from the expiration date)
The expiration date for the ink has passed.
(2 month from the expiration date)
The ink in the ink tank has run out.
(remaining less than 300cc)
The ink in the ink tank is low.
(remaining less than 400cc)
The remaining amount of ink charged in
this machine is low.
The ink remaining in the printer has
reached zero.
Abnormality occurs in the weight balance
of the supply unit.
Chapter 5 Troubleshooting
Measures
• Set the ink tank on the ink slot with the
warning.
• Since the available ink has run out, it will
not be able to use such as a print or
cleaning.
• P.3-28Check the ink that has occurred
warning in the "Displaying the Informa-
tion of this machine", and remove the
cause.
• Since the available ink has run out, it will
not be able to use such as a print or
cleaning soon.
• Check the ink that has occurred warning
in the "Displaying the Information of this
machine (P.3-28)", and remove the
cause.
• The expiration date has passed.
However, you can use it until the end of
the following month.
• If you want to replace it with a new ink,
please perform the "Discard the expired
ink (P.4-25)".
• One month has passed after the expira-
tion date.
However, you can use it until the end of
this month. (The ink bottle lamp blinks in
red.)
• If you want to replace it with a new ink,
please perform the "Discard the expired
ink (P.4-25)".
• Two months have passed after the expi-
ration date.
• If you want to replace it with a new ink,
please perform the "Discard the expired
ink (P.4-25)".
• Please shirttail the ink to the ink tank
warning is occurring.
( P.1-10)
• Charge the ink into the ink tank which the
warning occurred.
( P.1-10)
• Ink tank problems Please make sure that
the weight is set correctly to the ink tank,
do not apply shocks, and do not place
heavy objects on the ink tank..
• Please execute the "Tank Calibration
(P.4-28)".
• Turn off the power button to the machine
and turn it on after a while.
• If the same error message appears
again, contact your local distributor to call
for service.
1
2
2
2
5
5-11