MIMAKI Tx500P-3200DS Operation Manual page 54

Chapter 2 Basic Operation
Set the color fixing temperature and standby temperature
Set the color fixing temperature and standby temperature when heater is ON from LOCAL mode and the printer.
• Standby temperature is the holding temperature for shortening heating time of the heater and reducing damage to the
media.
• The transition to the standby temperature is only possible from the printer.
1
Touch the
• The setting menu will be displayed.
2
Touch the [Temperature Setting] button.
• The temperature setting screen will be displayed.
3
Set color fixing temperature and standby temperature.
• Touch the display temperature to set the temperature.
• [Fixing Heater Temperature]
Setting range: 150.0 ~
Setting unit: 0.1 °C
• [STAND-BY Temperature]
Setting range: 100.0 ~
Setting unit: 0.1 °C
Temperature chart screen
Displayed when you tap [F2] (Screen transition 2).
Changes in the set temperature and current temperature are displayed in the temperature chart.
Displays changes in temperature for the last 60 minutes.
Returns you to the TOP screen, when you tap
Set off timer
Set the time until the heater turns off automatically.
Depending on the mode, the operation of the off timer varies.
Mode
When leaving in the Ready state, the heater automatically turns off after the set time has elapsed.
LOCAL
When printing etc., it turns OFF after the set time has elapsed from the end of printing etc.
After completion of printing, the heater automatically turns OFF after the set time has elapsed.
REMOTE
2-24
button on the top screen.
200.0 °C
150.0 °C
.
Operation