Machine Setup Menu Table - MIMAKI TS55-1800 Operation Manual

Chapter 3 Setup

MACHINE SETUP MENU table

Function name
AUTO Power-off ( P.3-14)
Sub take-up unit
TAKE-UP UNIT
( P.3-14)
Sub take-up SW
ON
Top blower
( P.3-14)
OFF
MEDIA REMAIN ( P.3-14)
At Startup
Media Detect
( P.3-15)
Detect Speed
LANGUAGE ( P.3-15)
TIME SET ( P.3-15)
UNIT/ TEMP. ( P.3-16)
UNIT/ LENGTH ( P.3-16)
KEY BUZZER ( P.3-16)
VIEW FEED ( P.3-16)
Space Btwn PP. ( P.3-16)
SPACE FEED MODE (
Set the network.
Check IP Addr.
Check MAC Addr.
DHCP
NETWORK
( P.3-17) AutoIP
IP Address
Default Gateway
DNS Address
SubNet Mask
3-12
Set value
NONE/
10 ~ 30~ 600min
ON/ OFF
ON/ OFF
AUTO/ STORONG/ WEAK
ON/ OFF
ON/ OFF
High / Normal
日本語 /English/ 中文 /Turkce
+4h ~ -20h (Japan time)
°C (Centigrade)/°F (Fahrenheit) A unit for displaying temperature is set.
mm / inch
ON / OFF
ON / OFF
ON / OFF
INTERMITTENT /
P.3-16)
CONTINUOUS
The IP address currently used by this machine is displayed.
The IP address currently used by this machine is displayed.
ON / OFF
ON / OFF
*1
Set the IP address used by this machine.
*1
Set the default gateway used by this machine.
*1
Set the DNS server address used by this machine.
*1
Set the digit number of the subnet mask used by this machine.
Meaning
When no operation has been performed for the
set time, the power supply is automatically
turned "OFF".
Set whether or not to use sub take-up unit.
Sets the operation method when pressing the
ON / OFF button of the sub take-up unit.
Set the operation of the top blower in print.
You can control the remaining amount of media.
Set whether or not to detect media at the
machine startup.
Set the media detection speed.
Displayed language is changed.
Time difference is corrected.
A unit for displaying length and area is set.
A buzzer sound when keys are pressed is set.
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
Change the feed mode of the margin included in
the image data.
When it is ON, the IP address given by the
DHCP server is used.
When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.