Table of Contents
Advertisement
Chapter 3 Setup
Set the server
1
Press the
2
Press
and press the
3
Press the
4
Press
and press the
5
Press
press the
6
Press
and press the
7
Press
and press the
8
Press
Address and press the
• Press the jog key [][][][] to set SMTP
address.
• Input the SMTP address name.
9
Press
No.", and press the
10
Press
press the
• Set the SMTP port number.
11
Press
ADDRESS", and press the
12
Press
Address and press the
• Press [][][][] and set the e-mail address to
be used as the sender mail address.
• Set it with alphanumeric characters and symbols
within 64 characters.
• Depending on your server, if you do not
set the e-mail address not supporting the
account, sending/ receiving e-mails may
be unavailable.
13
Press
and press the
3-24
(MENU) in Local.
to select machine setup,
key.
(>>) twice.
to select "Network & Mail",
key.
to select "Event Mail", and
key.
to select "Server Setup",
key.
to select "SMTP Address",
key.
to set SMTP
key.
to select "SMTP PORT
key.
to set SMTP Port No. and
key.
to select "SENDER
key.
to set Sender Mail
key.
to select "Authentication",
key.
14
Press
to select "Authentication",
and press the
• Set the SMTP server authentication method
(SMTP authentication).
• When you select [OFF], proceed to the Step 15.
• If you select [SMTP Authentication], after the
operation of the steps 15-18, go to step 23.
• When you select [OFF], proceed to the Step 23.
15
Press
to select "USER NAME",
and press the
16
Press
name, and press the
• Press [][][][] to set the user name to use
for the authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
17
Press
to select "PASSWORD",
and press the
18
Press
and press the
• Press [][][][] to set the password to use for
the authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
• On the password setting screen, you can
only check the value that you are currently
inputting.
19
Press
to select "POP3 Address",
and press the
20
Press
Address and press the
• Press [][][][] to set POP server.
• Input the POP server name.
21
Press
to select "APOP", and
press the
22
Press
to set ON/OFF, and press
the
key.
23
Press
the setting.
key.
key.
to set the user
key.
key.
to set Password
key.
key.
to set POP3
key.
key.
key several times to end
Advertisement
Table of Contents
