Table of Contents
Advertisement
Installing the counter weight for
adjusting the take-up/ feeding tension-
bar weight
Install the proper number of counter weights depending
on the media condition.
You can attach the counter weight up to 5 each for right
and left.
Media condition
Ruck is generated in the media
feeding direction.
The media skews at printing.
The media sags and the
machine cannot take it up
beautifully.
The media floats on the platen.
For the feeding tension bar
Attach weights to the tension bar when you want to make
the feeding tension bar heavier.
After attaching the counter weight, stop so that the
weights do not fall.
If you want to reduce the weight of the tension bar, tighten
the nut and shorten the spring.
Attach the weight of the tension bar when you want to
make the take-up tension bar and the feeding tension bar
heavier.
After attaching the
counter weight, please
stop so that the weight
does not fall.
Solution
The tension applied on the
media is too strong.
According to your media,
reduce the weight of the
tension bar.
The tension applied on the
media is too weak.
According to your media,
increase the weight of the
tension bar.
If you want to reduce the
weight of the tension bar,
please tighten the nut
and shorten the spring.
Chapter 2 Basic Operation
For the take-up tension bar
Attach weights to the carabiner on the base of the tension
bar when you want to make the take-up tension bar
heavier.
Adjust the number of weights according to your needs.
If you want to reduce the weight of the take-up tension
bar, connect the carabiner on the base of the tension bar
to the carabiner at the top, and attach weights to the
machine's carabiner.
Adjust the number of weights according to your needs.
• The counter weight is very heavy. Handle it with
care.
If your finger or foot is stuck in the weight, you may
be injured.
• Not to lose the unused counter weight, put it in the
storage box.
2
2
2
2
2-17
Advertisement
Table of Contents
