Setting Of Refresh Left; Setting Of Drying Fan; Setting Of Feed Speed - MIMAKI Tx500P-3200DS Operation Manual

Chapter 3 Setup

Setting of Refresh Left

When you want to make a flushing operation at the left
side of the machine, set to "ON".
1
Press the
Local.
2
Press
press
• Setup menu will be displayed.
3
Press the
4
Press
and press the
5
Press
and press the
• Set Value : ON/ OFF
6
Press
the setting.

Setting of Drying Fan

Set the airflow for the fan for drying media.
You can set the airflow for the drying fan to dry the media
effectively.
1
Press the
Local.
2
Press
press
• Setup menu will be displayed.
3
Press the
4
Press
press the
5
Press
and press the
• Setting value: Host/10 to 200% (in increments of
10%)
6
Press
the setting.
3-10
key in
(MENU)
to select SETUP 1 to 4, and
key.
(>>) .
to select "Refresh Left"
key.
to select the setting value,
key.
key several times to end
key in
(MENU)
to select SETUP 1 to 4, and
key.
(>>) twice.
to select "Drying Fan" and
key.
to select the setting value,
key.
key several times to end

Setting of Feed Speed

Changes the media feeding speed in printing.
1
Press the
Local.
2
Press to select SETUP 1 to 4, and
press key.
• Setup menu will be displayed.
3
Press the
4
Press to select "Feed Speed"
and press the
5
Press to select the setting value,
and press the
• Set value : Host/ 10 to 200%
6
Press
the setting.
• If you change the settings of the print speed, the
color might change. After changing the feed
speed, please check there is no change in the
color in advance.
• After changing the settings, please perform the
media correction (
key in
(MENU)
(>>) twice.
key.
key.
key several times to end
P.3-6).