Machine Setup Menu Table - MIMAKI JV150-130 Operation Manual

MACHINE SETUP MENU table

Function name
AUTO Power-off ( P.3-12)
TAKE-UP UNIT
TAKE-UP UNIT
TENSION BAR
( P.3-12)
TAKE-UP SW
Drying/Exhaust FAN
MEDIA REMAIN ( P.3-13)
*1
case weight
600cc cartridge
( P.3-13)
cartridge weight
LANGUAGE ( P.3-16)
TIME ( P.3-16)
UNIT/ TEMP. ( P.3-16)
UNIT/ LENGTH ( P.3-16)
KEY BUZZER ( P.3-16)
CONFIRM. FEED ( P.3-17)
SPACE FEED MODE ( P.3-17)
Set the network.
Check IP Addr.
Check MAC Addr.
DHCP
NETWORK
( P.3-17) AutoIP
*2
IP Address
Default Gateway
DNS Address
SubNet Mask
Mail Delivery
( P.3-18)
Select Event
( P.3-19)
EVENT MAIL
Mail Address
( P.3-19)
Message Subject
( P.3-19)
Server Setup
( P.3-20)
Set value
NONE/
10 ~ 600min
ON/ OFF
ON/ OFF
Continuance/ Temporary
Set when use the optional Drying / exhaust fan. For more information, please refer to the
instruction manual that came with the Drying/exhaust fan.
ON/ OFF
+4h ~ -20h
°C (Centigrade)/°F (Fahrenheit) °C
mm / inch
OFF / ON
ON / OFF
INTERMITTENT /
CONTINUOUS
The IP address currently used by this machine is displayed.
The IP address currently used by this machine is displayed.
ON / OFF
ON / OFF
Set the IP address used by this machine.
*1
Set the default gateway used by this machine.
*1
Set the DNS server address used by this machine.
*1
Set the digit number of the subnet mask used by this machine.
ON / OFF
Print Start
ON / OFF
Event
Print End Event ON / OFF
Error Event ON / OFF
Warning Event ON / OFF
Other Event ON / OFF
Set the e-mail address to which
you send the event mail.
Set the characters to write in the
subject of the event mail.
SMTP Address
SMTP Port No.
SENDER ADDRESS
Chapter 3 Mchine setting
Default Meaning
When no operation has been performed for the
30min set time, the power supply is automatically
turned "OFF".
For setting whether the take-up unit is used or
ON
not used.
For setting whether the optional tension bar is
OFF
used or not used.
Continua Set the operation method when press the ON /
nce OFF button on the take-up unit.
OFF You can control the remaining amount of media.
Setting the weight of eco-cases.
Setting the weight of cartridges.
English Displayed language is changed.
Japan time Time difference is corrected.
A unit for displaying temperature is set.
mm A unit for displaying length and area is set.
ON A buzzer sound when keys are pressed is set.
Set whether media feeding is performed for
ON
checking the result of the test printing etc. or not.
INTERMI Change the feed mode of the margin included in
TTENT the image data.
When it is ON, the IP address given by the
DHCP server is used.
When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
Set whether you send/ do not send the e-mail
OFF
when the set event occurs.
Set whether you send/ do not send the e-mail at
OFF
the start of printing.
Set whether you send/ do not send the e-mail at
OFF
the end of printing.
Set whether you send/ do not send the e-mail
OFF
when a error occurs.
Set whether you send/ do not send the e-mail
OFF
when a warning occurs.
Set whether you send/ do not send the e-mail
OFF
when an event other than the above occurs.
Alphanumeric characters and symbols (within 96
characters)
Alphanumeric characters and symbols (within 8 characters)
Set the SMTP server.
Set the SMTP port number.
Set the e-mail address to be used as the sender mail
address.
1
2
3
4
5
6
3-11