Table of Contents
Advertisement
Setting the Confirm.
Set whether media feeding is performed for checking the
result of the test printing etc. or not.
1
Press the
2
Press
to select machine setup,
and press the
3
Press the
4
Press
to select "View Feed", and
press the
5
Press
to select ON/ OFF, and
press the
6
Press
the setting.
• In case of checking the print result after the
confirmation feed, check with the upper lid of Color
fixation device open.
Setting the amount of blank space
between printed lines
Sets the amount of blank space between printed lines.
1
Press the
2
Press
to select machine setup,
and press the
3
Press the
4
Press
to select "Space Btwn PP."
and press the
5
Press
to set the amount of blank
space, and press the
• Set value : None / 10 to 500mm
6
Press
the setting.
• If the printed data already has a blank space,
using this function will result in "Blank space of the
data + Amount of blank space set by using this
function" being output as a blank space.
(MENU) in Local.
key.
(>>) twice.
key.
key.
key several times to end
(MENU) in Local.
key.
(>>) twice.
key.
key.
key several times to end
Setting the feed mode of the space of
no data to be printed
Change the feed mode of the margin included in the
image data (the space of no data to be printed). If print
data with much margin, set to "Continuous", then the
print time can be shorten.
1
Press the
2
Press
to select machine setup,
and press the
3
Press the
4
Press
to select "Space Feed
Mode", and press the
5
Press
to select the space feeding
mode, and press the
• Intermittent: Perform intermittent feed operation
of the path division unit
• Continuous: Feed the no data part at a time
6
Press
the setting.
Chapter 3 Setup
(MENU) in Local.
key.
(>>) twice.
key.
key.
key several times to end
3
2
2
3-21
Advertisement
Table of Contents
