Setting The Color Fixation Device; Setting Of Logical Seek - MIMAKI Tx500P-3200DS Operation Manual

Chapter 3 Setup

Setting the color fixation device

1
Press the
Local.
2
Press
press
• Setup menu will be displayed.
3
Press
device" and press the
4
Press
device and press the
• Heater: Print-heater, Post-heater (1L/1R/2L/2R)
5
Press
the key.
Select [ON] to display each setting.
• Color fix.temp.
Set the temperature when fixing the color.
Setting range: 150.0 to 200.0 °C
Setting unit: Increments of 0.1 °C
• Stand-by temp.
Set the temperature when standing by.
Setting range: OFF, 100.0 to 150.0 °C
Setting unit: Increments of 0.1 °C
• Timer OFF
Set the time before the heater turns off
automatically.
Setting range: OFF, 1 to 60min
• Timer ON
Set the time before the heater turns on
automatically.
Setting range: OFF, 1 to 12H
6
Press
press the
7
Press
press the
8
Press
the setting.
3-8
key in
(MENU)
to select SETUP 1 to 4, and
key.
to select "Color fixation
key.
to select the Color fixation
key.
to set ON/OFF, and press
to select setting item, and
key.
to select a set value, and
key.
key several times to end

Setting of Logical Seek

The head's operation varies depending on the Logical
Seek settings, as shown in the figure below.
Movement of heads when LOGICAL seek is OFF
UNI-DIRECTIONAL
Media
Print area
Red arrow : Movement of head
Movement of heads when LOGICAL seek is ON
UNI-DIRECTIONAL
Media
Print area
Red arrow : Movement of head
1
Press the
Local.
2
Press to select SETUP 1 to 4, and
press key.
• Setup menu will be displayed.
3
Press to select "Logical Seek",
and press the
4
Press to select the setting value,
and press the
• Set value : Host / ON / OFF
5
Press
the setting.
• When Color fixation device is set to ON, Logical
Seek becomes invalid to prevent color
irregularities.
BI-DIRECTIONAL
Media
BI-DIRECTIONAL
Media
key in
(MENU)
key.
key.
key several times to end