MIMAKI Tx500P-3200DS Operation Manual page 82

Chapter 3 Setup
Setting the Nozzle Check
Select ON when you want to conduct nozzle check during
online printing.
1
Press
LOCAL.
• Nozzle Check menu will be displayed.
2
Press
press
• Setup menu will be displayed.
3
Press the
4
Press
Maint." and press the
5
Press
and press the
6
Select "ON", and press
7
Press
press the
• select the nozzle check interval from "LENGTH"
or "FILE".
• Length : nozzle check is conducted when the
printed length reaches the set length.
• File : nozzle check is conducted when the
number of printed files reaches the
set number.
• Time : When the print time reaches the time
set, perform the nozzle check.
8
Press
value, and press the
• The set value will differ according to the setting
selected in Step 5.
• Length : 0.1 to 100.0m (in 0.1m increment)
• File : 1 to 1000 (in 1 file increment)
• Time : 10 to 120min (in 10min increment)
9
Press
10
Press
type, and press the
• Setting value: Soft/ Normal/ Hard / Auto
• When Auto is selected, the most suitable cleaning
is performed automatically depending on the
condition of the nozzles.
11
Press
and press the
3-14
key in
(MENU)
to select SETUP 1 to 4, and
key.
(>>) twice.
to select "Auto Nozzle
key.
to select "Nozzle Check"
key.
key.
to select setting item, and
key.
to select the setting
key.
key.
to select the cleaning
key.
to select "Retry Count",
key.
12
Press to select "Retry Count",
and press the
• Setting value: 0 to 3
13
Press to select "Auto Nozzle
Recovery", and press the
14
Press to select "Judgement
Condition", press
head line and color, and press the
key.
15
Press to set the number of
nozzles for judgment, and press the
key.
• Setting value: 0 to 100 / OFF
• When set to "OFF", the nozzle check is not
performed.
16
Press to select "Separation",
and press the
17
Press to select setting value,
and press the
• When "RIP Separation" is selected, cleaning is
performed at the break between the images
specified by the RIP.
18
Press
key.
key.
to select the
key.
key.
key to end the setting.