Table of Contents
Advertisement
Chapter 6 Appendix
Specifications
Machine specifications
Item
Method
Print head
Specifications
Drawing mode (scan x feed)
Usable inks
Ink tank supply
Capacity of ink tank
Media type
Max. printing width
Maximum
Minimum
Thickness
Roll outside diame-
ter
Roll Media size
Roll weight
Roll inside diameter
Printing surface
Roll end treatment
Maximum
Leaf media size
Minimum
Leaf media
Margin
Roll media
Distance accuracy
Reproducibility
Perpendicularity
Media skew
Head height adjustment
Media delivery
Waste ink tank
Interface
Command
during standby
during continuous
Noise
printing
during discontinu-
ous printing
Power
6-2
Drop-on-demand piezoelectric print heads
12 heads: In line head x 3-layered staggered arrangement
*1
4-color ink set
540x360: Bi/Uni 2/ 3/ 4 pass
570x720: Bi/Uni 4/ 6/ 9 pass
720x720:Bi/Uni 4/ 6/ 9 pass
720x1080:Bi/Uni 6/ 9/ 12 pass
6-color ink set
540x360:Bi/Uni 4/ 6/ 9 pass (only normal mode)
540x540:Bi/Uni 6/ 9/ 12 pass
720x720:Bi/Uni 9/ 12/ 15 pass
720x1080:Bi/Uni 12/ 15/ 18 pass
Sb320 ink (M,B,Y,K,Lm,Lb), Non-deaeration, 2 liter bottle
Expansion system
3L/1 tank (UISS connection for Lb and Lm only for 4 colors or 6 colors, on car-
riage deaeration)
Preprocessed polyester material
3290 mm (129.5 in)
3300 mm (129.9 in)
*2
297 mm (11.7 in)
1.0 mm or less (0.039 in or less)
When using take-up unit and feeding unit : Φ300 mm or less (Φ11.8 in or less)
*3
When using feeding unit: 130 kg or less (286 lb or less)
When using take-up unit and feeding unit: 3 inches
Involuted and revoluted
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
3290 mm (129.5 in)
297 mm (11.7 in)
Left end and right end : 15.0 mm (Default) Front : 150 mm Rear : 400 mm
Left end and right end : 0.59 in (Default) Front : 5.9 in Rear : 15.7 in
Left end and right end : 15.0 mm (Default) Front : 150 mm Rear : 0 mm
Left end and right end : 0.59 in (Default) Front : 5.9 in Rear : 0 in
Whichever the larger one of ± 0.2 mm (0.007 in) or ± 0.1 % of the designated
± 0.5 mm / 1000 mm
5 mm or less / 10 m
1.5 to 7.0 mm (0.06 in to 0.28 in) pitch user settings (media thickness auto measured)
Take-up device supplied as a standard accessory (switching possible between
face in and face out
Tank type (3.6 liters), FULL detection, bottle installation detection
USB 2.0, Ethernet 1000BASE-T
MRL-IV
Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
Less than 65 dB
*11
Less than 77 dB
Main printer unit: Single phase AC200 - 240V ±10%, 50/60Hz ±1Hz, 29A or less
In line color fixation device: Three phase AC200V ±10%, 50/60 Hz ±1 Hz, 125A
or less
Specifications
*4
*4
*7
*7
(± 0.01 in / 39.4 in)
*4
*7
(0.19 in or less / 393.7 in)
*9
).
*10
*4 *5 *6
*4 *5 *6
*4 *5 *6
*4 *5 *6
*4 *7 *8
*4
*7
Advertisement
Table of Contents
