Setting Of Maps4 - MIMAKI Tx500P-3200DS Operation Manual

Setting of MAPS4

If performing media correction does not resolve feeding
stripes, use the MAPS (Mimaki Advanced PassSystem)
function to disperse the pass boundary to make the
feeding stripes less visible.
• Changing the MAPS4 settings may change the
color tone. Check the effects before use.
• MAPS may not be effective depending on image to
be printed. Check the effects before use.
 Conditions which the effect of the MAPS
function is not obtained
The MAPS function may be disabled under the follow-
ing conditions. In addition, the MAPS is not effective,
depending on the image to be printed.
4-colors ink set
Resolution Pass Scan speed
540 x 360 2 pass High speed
540 x 720 4 pass High speed
720 x 720 4 pass High speed
720 x 1080 6 pass High speed
6-colors ink set
Resolution Pass Scan speed
540 x 360 4 pass High speed
540 x 540 6 pass High speed
720 x 1080 12 pass High speed
Setting MAPS4 Function
1
Press the
Local.
2
Press to select SETUP 1 to 4, and
press key.
• Setup menu will be displayed.
3
Press the
4
Press to select "MAPS4", and
press the
5
Press to select a set value, and
press the
• Set value: Auto/ Manual
• If you have selected "Manual", proceed to step 5.
Otherwise, proceed to step 10.
6
Press to select the "Speed", and
press the
7
Press to select the speed, and
press the
• Set value: 50 to 100%
8
Press to select the "Smoothing
Lv.", and press the
MAPS MODE
Manual
(Speed: 100%)
MAPS MODE
Manual
(Speed: 100%)
key in
(MENU)
(>>) twice.
key.
key.
key.
key.
key.
9
Press to change the smoothing
level, and press the
• Set Value : 0 to 100% (set in units of 5%)
• The MAPS4 effect become strong as the set
value increase, and become weak as the set
value decrease.
10
Press
the setting.
Chapter 3 Setup
key.
key several times to end
3-11
3
2
2