Chapter 1 Before Use; About Installing This Machine; Setup Location; Working Environmental Temperature - MIMAKI Tx500P-3200DS Operation Manual

Chapter 1 Before Use

About installing this
machine

Setup Location

Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Model Width
5620mm
Tx500P-3200DS
(221.3 in)
Color fixation
4300mm
device + VT
(169.3 in)
take-up device
External ink 960mm
supply unit (37.8 in)
Electrical unit of
910mm
color fixation
(35.8 in)
device
*1. When the tension bar is flat
500 mm or more
(19.7 in or more)

Working Environmental Temperature

Use this machine in an environment of 20 to 30°C to
ensure reliable printing.
The heater temperature may not reach the set value,
depending on the ambient temperature.

About Ventilation Equipment

Because Color fixation device of this machine produces
the sublimation gas, please prepare a dust collector and a
ventilation equipment.
Recommended specifications
Dust collector: Air volume 20 m
Ventilation equipment:
In case of a hood
Area: more than 0.8 m
Air volume: more than 40 m
In case of the whole room
Air volume: more than 25 m
1-2
Gross
Depth Height
weight
*1
1800mm 1820mm 1430kg
(70.9 in) (71.7 in) (3,152.6 lb)
2000mm 1040mm 960kg
(78.7 in) (40.9 in) (2,116.4 lb)
510mm 730mm 30kg
(20.1 in) (28.7 in) (66.1 lb)
600mm 1240mm 140kg
(23.6 in) (48.8 in) (308.6 lb)
500 mm or more
(19.7 in or more)
3
/min
2
3
/min
3
/min

About fixing machine

The leg of this machine has the level foot to fix the
machine.
Before turning the power ON, make sure that the printer
body is fixed with the leveling feet.
The printer body may start moving during operation if it is
not fixed with the leveling feet.
• Put the supplied iron base plate (black) between
each leveling foot and the floor. To hold the weight
of the printer, using plate is recommended.

Moving This Machine

• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur.
Be sure to request your distributor or our service
office to move this machine.