Table of Contents
Advertisement
5
Shift the flushing unit to the left.
(1) Remove the clasp.
(2) Hold The Handle And Shift The Flushing
Unit.
Handle
6
Wipe ink sticking to the side of the head off
with a clean stick.
• Never rub the nozzles.
Clean the side surface of the
head (shown in deep gray)
with a clean stick.
The nozzle part
(Never touch it.)
7
Press the
8
Return the flushing unit to the original
position.
(1) Hold The Handle And Shift The Flushing
Unit.
(2) Fasten the clasp.
Handle
9
Close the lower part of the left side front
cover then press the
• After its initial operation, the machine returns to
Local.
clasp
Clean with a clean stick or a
waste cloth.
key after the cleaning.
clasp
key.
When nozzle missing
Cannot Be Solved
When nozzle missing cannot be solved even after the
head cleaning (
P.2-34) has been done, perform the
following three functions:
Nozzle Wash
• Wash the head nozzle. (
• Alternative nozzles for printing, when
Nozzle
nozzles missing can not be improved.
Recovery
(
P.4-16)
• Fill the head with ink.
Sub Tank
(
P.5-4)
Washing the Head Nozzle
Perform cleaning of the nozzles in the heads to prevent
them being clogged with coagulated ink.
1
Press the
(MAINT) in LOCAL.
• The Maintenance menu appears.
2
Press
to select "Nozzle Wash",
and press the
• The carriage moves onto the platen.
3
Open the lower part of the right side front
cover.
(1) Remove the screws of the right side front
cover (for two positions).
(2) Hold the upper of the lower part of the right
side front cover and pull it to the front.
• Open the lower part of the right side front cover
with the supplied screwdriver.
Lower part of the right
Screw
side front cover
Chapter 4 Maintenance
P.4-15)
key and press
key.
Carriage
4-15
4
2
Advertisement
Table of Contents
