Table of Contents
Advertisement
Chapter 2 Basic Operation
l
3
Attach the paper core.
(1) Put the roll shaft through a paper core.
• Please be careful not to pinch your hand between
the paper tube and the roll shaft.
(2) Adjust the paper core so that it comes to the
center of the roll shaft.
(3) Turn the handle of the right and left roll
holder, and set to the innermost of the green
part of the movable range seal.
left
movable range seal
(4) Push both sides of the roll holders into the
paper core, and tighten screws with supplied
ratchet handle to fix.
2-8
Paper core
right
Handle
Ratchet
handle
When you fix the roll holder, please do not lift
the lever of the fixing screws.
• When the entire fixing screws are raised above,
screws idle and can not be fixed.
Please note the orientation of the ratchet handle
at the time of fixing.
• If the ratchet handle is turned
sideways, hit the roll shaft during
the unit is in operation, and may
not be able to rotate smoothly.
After tightening the screw, turn
the ratchet handle in toward the
roll holder.
(5) Turn the handle of the take-up roll holder to
tightly secure the paper core.
Roll holder
movable range seal
• As the paper core is not idling in the middle of
taking up the media, please tightly secure the
paper core.
• When you fix the paper core, keep it within the
range indicated with the "movable range seal".
movable range seal
(Green part)
Handle
Advertisement
Table of Contents
