MIMAKI Tx500P-3200DS Operation Manual page 97

This chapter
describes the items required to use this machine more comfortably, which are the
methods for the daily care, the maintenance of the ink unit etc.
Maintenance ................................................. 4-2
Precautions for Maintenance ...................... 4-2
About Cleaning Solution .............................. 4-2
Cleaning the Exterior Surfaces ................... 4-2
Cleaning the Platen ..................................... 4-2
Cleaning the Lapel Bar (Take-up Side) ....... 4-3
Cleaning the Tension Roller ........................ 4-3
Cleaning the Brake Roller ........................... 4-4
Cleaning the Ink Landing Plate ................... 4-4
Cleaning the Fabric Retainer ...................... 4-4
Maintaining the Grit Roller ........................... 4-4
Cleaning the Color Fixation Device ............. 4-6
Cleaning the Area around Flushing Unit ....... 4-6
Cleaning the Flushing BOX Sensor ............ 4-6
Cleaning the ink receiving sponge .............. 4-7
About Maintenance Menu ............................. 4-8
Maintenance menus at-a-glance ................. 4-9
Maintaining the Capping Station ................. 4-10
Cleaning the Wiper and Cap ..................... 4-10
Washing the Ink Discharge Passage ........ 4-12
When the Machine Is Not Used for a Long
Time (Custody Wash) ............................... 4-12
Maintenance
Cleaning the Ink Head and the Area
around It ......................................................4-14
When nozzle missing Cannot Be Solved ....4-15
Washing the Head Nozzle .........................4-15
Nozzle Recovery Function .........................4-16
Automatic Maintenance Function ................4-19
Setting the Refreshing level .......................4-19
Setting the Cleaning level ..........................4-19
Charging ink ................................................4-20
Replacing the Waste Ink Tank ....................4-21
If a Waste Ink Tank Confirmation
Message Appears ......................................4-21
For the operation limitation by the
amount of waste ink ...................................4-23
Replacing consumables ..............................4-24
Replacing the wiper ...................................4-24
Replacing the HF filter ...............................4-24
Discard the expired ink ..............................4-25
Replacing the Ink Tank ..............................4-26
Replacing the ink absorber ........................4-27
Tank Calibration .........................................4-28
Chapter 4