Machine Setup Menu; Machine Setup Menu Table - MIMAKI TxF150-75 Operation Manual

Machine Setup Menu

The Machine Setup menu provides a variety of convenient settings.
The following items can be set in the machine settings.

Machine setup menu table

Function name
AUTO Power-off ( P.3-9)
Drying/Exhaust Fan
MEDIA REMAIN ( P.3-9)
LANGUAGE ( P.3-9)
TIME SET ( P.3-9)
UNIT / TEMP ( P.3-9)
UNIT / LENGTH ( P.3-9)
Eco cartridge Case Weight
Cartridge
Weight
KEY BUZZER ( P.3-10)
VIEW FEED ( P.3-10)
SPACE FEED MODE（ P.3-
10）
Network For configuring network settings.
( P.3-11)
Check IP
ADDRESS
Check MAC
ADDRESS
DHCP
AutoIP
IP
ADDRESS
DEFAULT
GATEWAY
DNS
ADDRESS
SUB NET
*1
MASK
Setting value
5–60 min.
Set when the optional drying/exhaust fan is used. For details, refer to the fan operation
manual.
ON / OFF
+4 h to -20 hr.
C (Celsius) / F (Fahrenheit)
mm / inch
ON / OFF
ON / OFF
INTERMITTENT /
CONTINUOUS
Shows the machine's current IP address.
Shows the machine's current MAC address.
ON / OFF
ON / OFF
Sets the IP address used by the machine.
*1
Sets the default gateway used by the machine.
*1
Sets the DNS server address used by the machine.
*1
Sets the subnet mask used by the machine.
Default Setting
5 min. Automatically turns off the machine
after it has been left idle for the
specified time.
OFF Enables management of the remaining
amount of media.
English Changes the display language.
Japan time Sets the current time and date.
C
Sets the unit for temperature display.
mm Sets the unit for length and area
display.
Registers the eco cartridge case
weight.
Registers the cartridge weight.
ON Sets an audible tone when keys are
pressed.
ON Sets whether media feeding is
performed in order to check test
printing results, for example.
INTERMITTENT Alters the feed method for blank space
included in image data.
Set to ON to use an IP address set by
the DHCP server.
Set to ON to use an IP address set by
the AutoIP protocol. Note that DHCP is
given priority when DHCP is set to ON.
Chapter 3 Settings
Details
3-7
1
2
3
4
5
6