Setting The Cleaning Level; Charging Ink - MIMAKI TS500P-3200 Operation Manual

Chapter 4 Maintenance

Setting the Cleaning level

The head cleaning level is set.
1
Press the
2
Press
and press the
• Maintenance menu appears.
3
Press
and press the
4
Press
press the
5
Press
and press the
• Set value : OFF/Lv.1/Lv.2/Lv.3
• When you select OFF, proceed to the Step 7.
6
Press
and press the
• Set value : Soft/ Normal/ Hard
7
Press the
end the setting.
4-18
(MENU) in Local.
to select "Maintenance",
key.
to select "Auto Maint.",
key.
to select "Cleaning", and
key.
to select the cleaning level,
key.
to select the cleaning type,
key.
key several times to

Charging ink

If auto charging is not possible, or if you want to check the
content of the IC chip before charging ink, perform the
following operation.
1
Press the
2
Press to select "Maintenance",
and press the
3
Press to select "Charge Ink", and
press the
4
Press to select the ink tank to be
charged.
5
Press the
• If the selected ink tank is near its expiration date, a
confirmation screen will appear. If OK, press [].
E x p i r a t i o n
C H A RG E A N YWA Y ?
E x p i r a t i o n
NO <
E x p i r a t i o n : 1 MON T H
C H A RG E A N YWA Y ?
E x p i r a t i o n : 1 MON T H
NO <
• The selected tank cannot be charged an either of
the following situations. (P.3-28)
(1) The volume of remaining ink managed by
the printer is 100%.
(2) The ink expiration date has passed by 2
months or more.
(MENU) in LOCAL.
key.
key.
key.
Displayed
alternately
> Y E S
Displayed
alternately
> Y E S