Table of Contents
Advertisement
Charging ink different from the one in use [Ink Change]
The Ink Change function charges ink different from the one currently in use. When the same type of
ink as is set in the ink station is to be used, it is unnecessary to execute this function.
• Be sure to use the inks and ink cartridges specified by MIMAKI. Please
be noted that MIMAKI shall have no liability for any trouble that arises
when using any ink cartridge or ink other than the genuine MIMAKI
brand ones.
• For ink replacement, please purchase the optional Washing Liquid
cartridge (for water base ink) in advance.
• Before replacing ink, empty out the waste ink tank.
STEPS:
1. Make sure that the FUNCTION mode is dis-
played.
2. Press the [ ] and [ ] key to select the [MAIN-
TENANCE].
3. Press the [ENTER] key.
4. Press the XY keys [ ] or [ ] to select [Ink
Change] .
5. Press the [ENTER] key.
6. Press the XY keys [ ] or [ ] to select a car-
tridge which does not be exchanged.
7. Press the [ENTER] key.
8. Take out the changing ink cartridge from the
ink station.
Discharge of the filled ink is started.
It displays the remaining run-time.
- 5.12 -
FUNCTION
SETUP
< ENT >
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
List
< ent >
MAINTENANCE
Ink Change
< ent >
Change
: 1 2 5 6 3 4 7 8
Select
: A B E F C D G H -
Change
: 1 2 5 6 3 4 7 8
Select
: A B E F C D G H -
Remove Cartridge
1 2 5 6 3 4 7 8 ABEFCDGH
Washing
00: ∗∗ : ∗∗
1/5
Advertisement
Table of Contents
