When Charging Ink Different From The One In Use [Ink Change] - MIMAKI Tx2-1600 Operation Manual

When charging ink different from the one in use [INK CHANGE]

The INK CHANGE function charges ink different from the one currently in use. When the
same type of ink as is set in the ink station is to be used, it is unnecessary to execute this
function.
• Be sure to use the inks and ink cartridges specified by MIMAKI. Please be
noted that MIMAKI ENGINEERING CO., LTD. shall have no liability for any
trouble that arises when using any ink cartridge or ink other than the genuine
MIMAKI brand ones.
• An additional head cleaning cartridge is required for ink replacement.
STEPS:
1. Select [INK CHANGE] from [MAINTENANCE].
(See page 4.3)
2. Press the [ENTER] key.
The ink type currently filled in the ink station is shown.
3. Press the JOG keys [ ] and [ ] to set the type of
ink to be filled in the R-row ink station.
[Acid] : Acid dye ink
[Reac] : Reactive dye ink
[Disp] : Disperse ink
4. Press the JOG key [ ] to move the cursor.
5. Press the JOG keys [ ] and [ ] to set the type of
ink to be filled in the F-row ink station.
6. Press the [ENTER] key.
7. Press the [ENTER] key.
- 4.26 -
M A I N T E N A N C E
I N K CH A N G E < e n t >
I n k S e t R : A c i d
F : A c i d
I n k S e t R : R e a c
F : A c i d
I n k S e t R : R e a c
F : A c i d
I n k S e t R : R e a c
F : A c i d
I N K CH A N G E
S T A R T
W A S H
R E M O V E C A R T R I DGE
: e n t