Action To Take After An Electrical Accident; General Electrical Safety Guidelines And Warnings - Juniper SSR1200 Hardware Manual

Hide thumbs Also See for SSR1200:

Table of Contents

Avertissement La mise au rebut définitive de ce produit doit être effectuée

conformément à toutes les lois et réglementations en vigueur.

Warnung Dieses Produkt muß den geltenden Gesetzen und Vorschriften entsprechend

entsorgt werden.

Avvertenza L'eliminazione finale di questo prodotto deve essere eseguita osservando le

normative italiane vigenti in materia

Advarsel Endelig disponering av dette produktet må skje i henhold til nasjonale lover og

forskrifter.

Aviso A descartagem final deste produto deverá ser efectuada de acordo com os

regulamentos e a legislação nacional.

¡Atención! El desecho final de este producto debe realizarse según todas las leyes y

regulaciones nacionales

Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets alla lagar

och föreskrifter.

Action to Take After an Electrical Accident

If an electrical accident results in an injury, take the following actions in this order:

1. Use caution. Be aware of potentially hazardous conditions that could cause further injury.

2. Disconnect power from the device.

3. If possible, send another person to get medical aid. Otherwise, assess the condition of the victim, and

then call for help.

WARNING: Certain ports on the device are designed for use as intrabuilding (within-

the-building) interfaces only (Type 2 or Type 4 ports as described in

and require isolation from the exposed outside plant (OSP) cabling. To comply with

GR-1089-CORE )

Table of Contents