Basic Cflowd Configuration - Alcatel-Lucent 7710 SR OS Configuration Manual

Basic Cflowd Configuration

This section provides information to configure cflowd and configuration examples of common
configuration tasks. In order to sample traffic, the minimal cflowd parameters that need to be
configured are:
•
•
•
The following example displays a cflowd configuration.
A:ALA-1>config>cflowd# info detail
----------------------------------------------
----------------------------------------------
A:ALA-1>config>cflowd#
7710 SR OS Router Configuration Guide
Cflowd must be enabled.
At least one collector must be configured and enabled.
Sampling must be enabled on either:
 An IP filter entry and applied to a service or an port.
 An interface applied to a port.
active-timeout 30
cache-size 65536inactive-timeout 15
overflow 1
rate 1000
collector 10.10.10.103:2055 version 9
no aggregation
autonomous-system-type origin
description "V9 collector"
no shutdown
exit
template-retransmit 330
exit
no shutdown
Cflowd
Page 485