Communication Settings - Thermo Scientific 49i Instruction Manual

Communication Settings

Thermo Fisher Scientific
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Configure Datalogging > Data Treatment.
• Use
• Press
SET LREC DATA TYPE:
CURRENTLY:
RANGE
The Communication Settings menu is used with communications control
and configuration.
• In the Main Menu, choose Instrument Controls > Communication
Settings.
COMMUNICATION SETTINGS:
>BAUD RATE
INSTRUMENT ID
COMMUNICATION PROTOCOL
STREAMING DATA CONFIG
RS-232/RS-485 SELECTION
TCP/IP SETTINGS
RANGE
Baud Rate The Baud Rate screen is used to set the RS-232/RS-485 interface baud rate.
Baud rates of 1200, 2400, 4800, and 9600, 19200, 38400, 57600, and
115200 are available.
• In the Main Menu, choose Instrument Controls > Communication
Settings > Baud Rate.
• Use
and to scroll through a list of choices.
to save the data type.
AVG
SET TO: CUR
CHANGE VALUE
AVG DIAGS ALARM
AVG DIAGS ALARM
and to scroll through a list of choices.
Instrument Controls Menu
?
SAVE
Model 49i Instruction Manual
Operation
3-41