Thermo Scientific 49i Instruction Manual page 94

Operation
Instrument Controls Menu
Analog Input Configuration
3-58 Model 49i Instruction Manual
Table 3-7. Signal Type Group Choices
Concentrations
None
O (single range only)
3
LO O (dual/auto range only)
3
HI O (dual/auto range only)
3
Range Status (auto range only
The Analog Input Configuration menu displays a list of the 8 analog input
channels available for configuration. This screen is only displayed if the I/O
expansion board option is installed. Configuration includes entering
descriptor, units, decimal places, choice of 1-10 points in the table, and
corresponding number of points selected.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config.
ANALOG INPUT CONFIG:
>CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
RANGE AVG
Other Measurements
None
Intensity A
Intensity B
Noise A
Noise B
Flow A
Flow B
Pressure
Bench Temp
Lamp Temp
O Lamp Temp
3
IN1
IN2
IN3
IN4
IN5
IN6
IN7
DIAGS ALARM
Analog Inputs
None
Analog Input 1
Analog Input 2
Analog Input 3
Analog Input 4
Analog Input 5
Analog Input 6
Analog Input 7
Analog Input 8
Thermo Fisher Scientific