Thermo Scientific 49i Instruction Manual page 97

Thermo Fisher Scientific
NUMBER OF TABLE POINTS:
CURRENTLY:
RANGE
Table Point The Table Point submenu allows the user to set up an individual table
point.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Point 1-10.
TABLE POINT 01 CONFIG:
>VOLTS
USER VALUE
RANGE
Volts The Volts screen allows the user to set the input voltage for the selected
table point in the conversion table, from 0.00 to 10.50. The default table is
a two-point table with point 1: 0.00 V = 000.0 U and point 2: 10.00 V =
10.0 U.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Select Point > Volts.
• Use
• Use
• Press
SET TO:
INC/DEC
SAVE VALUE
AVG DIAGS ALARM
AVG DIAGS ALARM
and to move the cursor left or right.
and to move the cursor up and down.
to save the new value.
Instrument Controls Menu
2
10 ?
0.00
0.00
Model 49i Instruction Manual
Operation
3-61