Advertisement
Operation
Instrument Controls Menu
Data Treatment
Communication
3-30
Model 43i Trace Level-Enhanced Instruction Manual
In the Main Menu, choose Instrument Controls > Datalogging Settings >
Configure Datalogging > Memory Allocation %.
The Data Treatment screen is used to select the data type for the selected
record type: whether the data should be averaged over the interval, the
minimum or maximum measured during the interval, or the current value
(last value measured). Data treatment doesn't apply to all data, just to the
concentration measurement. All other data points log the current value at
the end of the interval.
In the Main Menu, choose Instrument Controls > Datalogging Settings >
Configure Datalogging > Data Treatment.
The communication Settings menu is used with communications control
and configuration.
Settings
In the Main Menu, choose Instrument Controls > Communication
Settings.
SET PERCENT SRECS:
CURRENTLY:
SET TO:
CHANGE VALUE
RANGE
AVG
SET
LREC DATA TYPE:
CURRENTLY:
SET TO:
CHANGE VALUE
RANGE
AVG
COMMUNICATION SETTINGS:
>BAUD RATE
INSTRUMENT ID
COMMUNICATION PROTOCOL
STREAMING DATA CONFIG
RS-232/RS-485 SELECTION
TCP/IP SETTINGS
RANGE
AVG
50 %
100 % ?
SAVE
DIAGS ALARM
AVG
CUR ?
SAVE
DIAGS ALARM
DIAGS ALARM
Thermo Fisher Scientific
Advertisement
Troubleshooting
