Thermo Scientific 49i Instruction Manual page 72

Operation
Instrument Controls Menu
Concentrations
Other Measurements
3-36 Model 49i Instruction Manual
DATA IN LREC FIELD
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG
The Concentrations screen allows the user to select the output signal that is
tied to the selected field item. The selected item is shown by "<--" after it.
Note that at this point, pressing
changes as opposed to implemented changes. To change the selected record
format and erase record log file data, see "Commit Content" below. Range
status is visible only in auto range mode.
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Select Content > Select Field > Concentrations.
• Use and
• Press to select a new choice.
CONCENTRATIONS:
>NONE
O3
LO O3
HI O3
RANGE STATUS
RANGE AVG
The Other Measurements screen allows the user to select the output signal
that is tied to the selected field item. The selected item is shown by "<--"
after it. Items displayed are determined by the options installed. Note that at
this point, pressing
opposed to implemented changes. To change the selected record format and
erase record log file data, see "Commit Content" below.
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Select Content > Select Field > Other Measurements.
1:
DIAGS ALARM
indicates that these are proposed
to move the cursor up and down.
<--
DIAGS ALARM
indicates that these are proposed changes as
Thermo Fisher Scientific