Thermo Scientific 49i Instruction Manual page 280

C-Link Protocol Commands
Measurement Configuration
B-32 Model 49i Instruction Manual
set lamp ddd.d
This command sets the photometer lamp setting. The example that follows
sets the photometer lamp to 75.0 %.
Send: set lamp 75.0
Receive: set lamp 75.0 ok
pres comp
This command reports whether pressure compensation is on or off. The
example that follows shows that pressure compensation is on.
Send: pres comp
Receive: pres comp on
set pres comp onoff
These commands turn the pressure compensation on or off. The example
that follows turns pressure compensation off.
Send: set pres comp off
Receive: set pres comp off ok
set pump onoff
This command turns the pump on or off. The example that follows turns the
pump off.
Send: set pump off
Receive: set pump off ok
temp comp
This command reports whether temperature compensation is on or off. The
example that follows shows the temperature compensation is off.
Send: temp comp
Receive: temp comp off
set temp comp onoff
These commands turn the temperature compensation on or off. The
example that follows turns temperature compensation off.
Send: set temp comp off
Receive: set temp comp off ok
Thermo Fisher Scientific