Thermo Scientific 49i Instruction Manual page 93

Choose Signal To Output
Thermo Fisher Scientific
Table 3-6. Analog Output Zero to Full-Scale Table
Output Zero % Value
O Lamp Temp User-set alarm min value
3
The Choose Signal Type To Output screen displays a submenu list of the
analog output signal group choices. Group choices are Concentrations,
Other Measurements, and Analog Inputs (if the I/O expansion board
option is installed). This allows the user to select the output signal to the
selected output channel. The Concentrations screen is shown below. See
Table 3-7 below for a list of items for each signal group choice.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Output Config > Select Channel > Choose Signal To Output.
• Use and
• Press to select a choice.
CHOOSE ITEM SIGNAL:
CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG
CHOOSE SIGNAL -
SELECTED OUTPUT:
CURRENTLY: O3
SET TO: NONE
CHANGE VALUE
RANGE AVG
to move the cursor up and down.
DIAGS ALARM
CONC
V1
?
SAVE
DIAGS ALARM
Model 49i Instruction Manual
Operation
Instrument Controls Menu
Full-Scale 100% Value
User-set alarm max value
3-57