Thermo Scientific 49i Instruction Manual page 95

Thermo Fisher Scientific
ANALOG INPUT 01 CONFIG:
>DESCRIPTOR
UNITS
DECIMAL PLACES
TABLE POINTS
POINT 1
POINT 2
RANGE
Descriptor The Descriptor screen allows the user to enter the descriptor for the selected
analog input channel. The descriptor is used in datalogging and streaming
data to report what data is being sent out. The descriptor may be from 1 to
3 characters in length, and defaults to IN1 to IN8 (user input channel
number).
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Descriptor.
• Press
ANALOG INPUT DESCRIPTOR:
CURRENTLY: IN1
RANGE
Units The Units screen allows the user to enter the units for the selected analog
input channel. The units are displayed on the diagnostic screen and in
datalogging and streaming data. The units may be from 1 to 3 characters in
length, and defaults to V (volts).
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Units.
• Press
AVG DIAGS ALARM
to save the new descriptor.
IN1
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
AVG DIAGS ALARM
to save the new value.
Instrument Controls Menu
IN1
V
2
2
BKSP
PAGE
SAVE
Model 49i Instruction Manual
Operation
3-59