Table of Contents
Advertisement
C-Link Protocol Commands
Alarms
B-12
Model 49i Instruction Manual
Send:
alarm bench lamp temp min
Receive:
alarm bench lamp temp 52.0 deg C
set alarm bench lamp temp min value
set alarm bench lamp temp max value
These commands set the bench lamp temperature minimum and maximum
value to value, where value is a floating-point number representing bench
lamp temperature alarm limits in degrees C. The example that follows sets
the alarm bench lamp temperature maximum value to 58
Send:
set alarm bench lamp temp max 58.0
Receive:
set alarm bench lamp temp max 58.0 ok
alarm bench temp min
alarm bench temp max
These commands report the bench temperature minimum and maximum
value current settings. The example that follows reports that the alarm
bench temperature minimum value is 15.0
Send:
alarm bench temp min
Receive:
alarm bench temp 15.0
set alarm bench temp min value
set alarm bench temp max value
These commands set the bench temperature minimum and maximum value
to value, where value is a floating-point number representing bench
temperature alarm limits in degrees C. The example that follows sets the
alarm bench temperature maximum value to 35
Send:
set alarm bench temp max 35
Receive:
set alarm bench temp max 35 ok
alarm conc o3 min
alarm conc o3 max
These commands report the conc O
maximum value current settings. The example that follows reports that the
O
concentration minimum value is 5.2 ppb.
3
Send:
alarm conc o3 min
Receive:
alarm conc o3 min 5.2 ppb
C.
°
C.
°
C.
°
concentrations alarm minimum and
3
Thermo Fisher Scientific
Advertisement
Table of Contents
Troubleshooting
