Thermo Scientific 49i Instruction Manual page 76

Operation
Instrument Controls Menu
Memory Allocation Percent
SET PERCENT SRECS:
CURRENTLY:
SET TO:
CHANGE VALUE
RANGE
Data Treatment
3-40 Model 49i Instruction Manual
SET PERIOD FOR SREC:
CURRENTLY:
RANGE
The Memory Allocation Percent screen is used to select the percentage of
each record type for both short records and long records. Percentages
between 0 and 100% are available in increments of 10. Changing this value
results in log erasure for both short records and long records.
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Configure Datalogging > Memory Allocation %.
• Use
• Press
the erasure warning screen.
• Press
50 %
60 % ?
SAVE
AVG DIAGS ALARM
The Data Treatment screen is used to select the data type for the selected
record: whether the data should be averaged over the interval, the minimum
or maximum used, or the current value logged. Data treatment doesn't apply
to all data, just to the concentration measurement. All other data points log
the current value at the end of the interval.
OFF MIN
SET TO:
CHANGE VALUE
AVG DIAGS ALARM
and to scroll through a list of choices.
to set the percentage for both record types and proceed to
to confirm change.
SET PERCENT SRECS:
THIS WILL ERASE ALL
60 MIN ?
SAVE
CURRENTLY:
SET TO:
PRESS TO CONFIRM CHANGE
RANGE AVG DIAGS ALARM
50 %
60 % ?
LOGS!x
Thermo Fisher Scientific