Thermo Scientific 49i Instruction Manual page 84

Operation
Instrument Controls Menu
Defalt Gateway
3-48 Model 49i Instruction Manual
IP ADDRESS:
CURRENT: 192.168.1.151
SET TO: 192.168.1.151 1
RANGE
Netmask The Netmask screen is used to edit the netmask. The netmask is used to
determine the subnet the instrument uses to directly communicate with
other devices. The netmask can only be changed when DHCP is OFF. For
more information on DHCP, see "Use DHCP."
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Netmask.
• Use
the netmask.
• Press
NETMASK:
CURRENT: 255.255.255.0
SET TO: 255.255.255.000
RANGE
The Default Gateway screen is used to edit the gateway address. Any traffic
to addresses that are not on the local subnet will be routed through this
address. The default gateway can only be changed when DHCP is OFF. For
more information on DHCP, see "Use DHCP."
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Gateway.
• Use
the gateway address.
MOVE CURSOR
CHANGE VALUE
SAVE
AVG DIAGS ALARM
, , and
to save the new netmask.
MOVE CURSOR
CHANGE VALUE
SAVE
AVG DIAGS ALARM
, , and
to move and change the value of
to move and change the value of
Thermo Fisher Scientific