I/O Configuration
Thermo Fisher Scientific
•
Press
DEFAULT GATEWAY:
CURRENT: 192.168.1.1
SET TO: 192.168.1.1
RANGE
Host Name
The host name screen is used to edit the host name. When DHCP is
enabled, this name is reported to the DHCP server.
•
In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Host Name.
•
Use
between the edit field and the alpha page.
•
Press
alpha page.
HOST NAME:
CURRENT: ISERIES
RANGE
The I/O Configuration menu deals with configuration of the analyzer's I/O
system. The analog input configuration is displayed only if the I/O
expansion board option is installed.
•
In the Main Menu, choose Instrument Controls > I/O Configuration.
to save the new address.
MOVE CURSOR
CHANGE VALUE
SAVE
AVG
DIAGS ALARM
,
,
and
to save the new letter in the alpha table or save the new
ISERIES SSSSSS?
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
AVG
DIAGS ALARM
Instrument Controls Menu
1
to move the cursor or change
BKSP
PAGE
SAVE
Model 49i Instruction Manual
Operation
3-49