Thermo Scientific 49i Instruction Manual page 83

Thermo Fisher Scientific
TCP/IP SETTINGS:
>USE DHCP
IP ADDRESS 192.168.1.151
NETMASK
GATEWAY
HOST NAME
RANGE
Use DHCP The Use DHCP screen is used to specify whether or not to use DHCP.
When DHCP is enabled, the network dynamically provides an IP address
for the instrument.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Use DCHP.
• Press
DHCP:
CURRENTLY:
CYCLE POWER TO CHANGE DHCP
RANGE
IP Address The IP Address screen is used to edit the IP address. The IP address can
only be changed when DHCP is OFF. For more information on DHCP, see
"Use DHCP."
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > IP Address.
• Use
the IP address.
• Press
255.255.255.0
192.168.1.1
AVG DIAGS ALARM
to toggle and set DHCP on or off.
SET TO:
TOGGLE VALUE
AVG DIAGS ALARM
, , and
to save the new address.
OFF
iSeries
OFF
ON ?
to move and change the value of
Model 49i Instruction Manual
Operation
Instrument Controls Menu
3-47