Internal Sample/Calibration; Zero Air Source; Chapter 9 Optional Equipment - Thermo Scientific 49i Instruction Manual

Sample/Calibration
Ozonator

Zero Air Source

Thermo Fisher Scientific
Chapter 9
The Model 49i is available with the following options:
•

"Internal Sample/Calibration"

• "Ozonator"
• "Zero Air Source"
• "Teflon Particulate Filter"
• "I/O Expansion Board Assembly"
• "Terminal Block and Cable Kits"
• "Cables"
• "25-Pin Terminal Board Assembly"
• "Mounting Options"
Internal
With the Internal Sample/Calibration option, the sample to be measured is
attached to the SAMPLE port and the zero or span gas is attached to the
CALIBRATION port.
The internal ozone generator provides easy determination of zero, precision,
and Level 1 span checks. The ozone level produced is a function of light
intensity at 185 nm and gas flow. The light intensity is varied by changing
the current into the lamp. The gas flow is held constant by a pressure
regulator followed by a capillary.
The zero air source option is a convenient system for generating pollutant
free zero gas for O
pump, filter, filter holder, and Silastic tubing.
Optional Equipment
on
on page 9-1
on page 9-1
on page 9-2
on page 9-2
on page 9-4
monitoring requirements. This option includes the
3
page 9-1
on page 9-2
on page 9-2
on page 9-4
Model 49i Instruction Manual 9-1