Display Pixel Test; Restore User Defaults; Password Menu - Thermo Scientific 49i Instruction Manual

Restore User Defaults

RESTORE USER DEFAULTS:
RANGE

Password Menu

Thermo Fisher Scientific
• In the Main Menu, choose Service > Display Pixel Test.
• Press
on or off.

DISPLAY PIXEL TEST:

DURING TEST PRESS
TO EXIT,
RANGE
The Restore User Defaults screen is used to reset the user calibration and
configuration values to factory defaults. The restore default user is visible
only when the instrument is in service mode. For more information on the
service mode, see "Service Mode" earlier in the chapter.
• In the Main Menu, choose Service > Restore User Defaults.
• Press
• Press
RESTORE
AVG DIAGS ALARM
The Password menu allows the user to configure password protection. If the
instrument is locked, none of the settings may be changed via the front
panel user interface. The items visible under the password menu are
determined by the instrument's password status.
• In the Main Menu, choose Password.
to begin test by turning all pixels on, then toggle between
OR
TO TOGGLEXXXXXX
BEGIN TEST
GO BACK TO MENU
AVG DIAGS ALARM
to warn and enable restore with
to overwrite all user settings with factory default values.
RESTORE USER DEFAULTS:
ARE YOU SURE YOU WANT
PRESS
RANGE
XX
.
RESTORE
TO CONFIRM RESTORE
AVG DIAGS ALARM
Model 49i Instruction Manual
Operation
Password Menu
TO?x
3-97