Table of Contents
Advertisement
Operation
Instrument Controls Menu
Instrument Action
Analog Output Configuration
3-54
Model 49i Instruction Manual
The Instrument Action screen allows the user to choose the instrument
action that is tied to the selected digital input.
•
In the Main Menu, choose Instrument Controls > I/O Configuration >
Digital Input Settings > Select Relay > Instrument Action.
•
Use
and
•
Press
to save the new selection for the relay.
CHOOSE ACTION:
>NONE
ZERO MODE
SPAN MODE
OZONATOR LVL 1
OZONATOR LVL 2
OZONATOR LVL 3
OZONATOR LVL 4
RANGE
AVG
OZONATOR LVL 5
SET BACKGROUND
CAL TO LO SPAN
CAL TO HI SPAN
OZONATOR SLND
AOUTS TO ZERO
AOUTS TO FS
The Analog Output Configuration menu displays a list of the analog output
channels available for configuration. Channel choices include all voltage
channels, all current channels, voltage channels 1-6, and current channels
1-6 (if the I/O expansion board option is installed). Configuration choices
include selecting range, setting minimum/maximum values, and choosing
signal to output.
•
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Output Config.
•
Use
and
•
Press
to select a choice.
to scroll through a list of choices.
DIAGS ALARM
<--
to move the cursor up and down.
Thermo Fisher Scientific
Advertisement
Table of Contents
Troubleshooting
