Thermo Scientific 49i Instruction Manual page 91

Select Output Range
Thermo Fisher Scientific
OUTPUT CHANNELS:
>ALL VOLTAGE CHANNELS
ALL CURRENT CHANNELS
VOLTAGE CHANNEL 1
VOLTAGE CHANNEL 2
VOLTAGE CHANNEL 3
VOLTAGE CHANNEL 4
VOLTAGE CHANNEL 5
RANGE AVG
ANALOG OUTPUT CONFIG:
>SELECT RANGE
SET MINIMUM VALUE
SET MAXIMUM VALUE
CHOOSE SIGNAL TO OUTPUT
RANGE AVG
The Select Output Range screen is used to select the hardware range for the
selected analog output channel. Possible ranges for the voltage outputs are:
0-100 mV, 0-1, 0-5, 0-10 V.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Output Config > Select Channel > Select Range.
• Use and
• Press to save the new range.
SELECT OUTPUT RANGE:
SELECTED OUTPUT:
CURRENTLY:
SET TO:
CHANGE VALUE
RANGE AVG
DIAGS ALARM
DIAGS ALARM
to move the cursor up and down.
V ALL
0-10V
0-5V ?
SAVE
DIAGS ALARM
Operation
Instrument Controls Menu
Model 49i Instruction Manual 3-55